Pocket Calendar Transformation Tutorial

I like to have one of these little pocket calendars in my purse, so that I can keep track of appointments and stuff when I am on the go. This one was pretty plain, so I thought I'd give it a make-over. It's fast, fun and easy, and this is what I came up with:

Supplies needed:

• Pocket Calendar (duh)
• Patterned scrapbook paper (one large enough to cover the whole outside, plus a little extra so that it can be folded around the edges)
• Paper trimmer
• Glue
• Ribbon
• Clear nail polish to finish ribbon
• Optional: other materials, like flowers and rhinestones to embellish

First, remove the plastic cover of the planner. If you plan on decorating with several layers of paper, trim the outside edges of the original planner cover a tiny little bit. This will give you more room to work with, and makes it easier to slip the cover back on.

Then, cut a piece of paper the same height as your planner. Lay the planner open as pictured, and make sure you cut the width a little larger than the planner, so that you can fold the edges around the original cover.

After that, take a piece of ribbon, about 1.5 times the height of the planner. Glue it to the paper you will use as the cover as shown in the picture.

Then, glue the paper around the cover.















Finish the end of the ribbon with some clear nail polish to keep it from fraying.

Use other papers and embellishments to decorate your planner.

Then you can slip the cover back on, and you're done.

I linked up to:

Reversible Vinyl Pocket Bib Tutorial

I noticed that the bibs we were using for our youngest had started to look kind of gross.
So I was planning on getting some new ones. But then, this weekend, I happened to run into this really cute vinyl material.
It's probably meant to be used as a tablecloth, but I thought I'd give it a try and use it for a bib.

And I am pretty happy with the result, so I wrote this tutorial.

It's pretty simple, and you don't need a lot of supplies, which is my favorite kind of project.
In fact, you might already have the vinyl on hand. You could just use an old tablecloth. The material that I used had a soft-feeling backing, and the front had a little texture to it.

Supplies

• an old bib to be traced
• paper to trace it on
• clear tape (optional)
  
• thread
• vinyl (enough for front and back of bib plus 2 pockets)
  
• bias tape
• piece of velcro
  

Step by step tutorial
(the numbers refer to the numbers in the picture above.)

1. Take a bib and trace it onto paper. Mark on the sides where the pocket starts.

2. Cut out the bib and the pocket - twice.
(Make sure you do this precisely, it is easier to put the bias tape over the edges if it matches exactly.)

3. Stack the pocket pieces together, with the wrong sides facing each other, so both right sides outside. Put a strip of bias tape around the top edge (the straight edge). I used clear tape to make it stay in place. Then sew the bias tape in place, using a straight stitch, length 3. (For vinyl you don't want the stitch to be too short, since it might rip the vinyl.)

4. Now that the pocket is made, put the bib part together, wrong sides facing again. Put the pocket on top of it and attach with clear tape so that it is in the right place. Then, fold the bias tape around the edge. I like to start somewhere on the top of the bib, where the velcro will be. Sew the bias tape in place with a straight stitch, length 3, working the bias tape around the bib as you go. For me it worked best to go really slow. Try to stay away as far from the edge of the bib as possible while staying on the bias tape, this to prevent ripping later. Keep going till you are getting close to where you started. Cut of the bias tape, and finish off.

5. Attach the velcro pieces to the top ends of the bib.

6. Your bib is done!

The cool thing about this bib is that you can turn the pocket inside out, because the 'back' is made of the same material. If you use it like that, the pocket will stay open, and 'catch' food much better. I always like bibs that have that option!

I linked up to:

Rose Basket Tutorial

Don't you just love to get pretty flowers?

I do, but I always feel sorry when the time comes I have to throw them away.

But my one of my favorite flowers happens to be roses.
And, roses can be dried pretty easily!
I made this rose basket with hardly any supplies,
and roses that would have gone into the garbage otherwise.

Do you want to make a rose basket of your own?

Here is a tutorial, it is really simple!

Supplies:

• Roses
• Basket
• A few sheets of (old) sheet music
  

1. When you have roses that are getting old, take them out of the vase.
Tie the stems together with a rubber band or twine.
Let the roses dry, by hanging them upside down in a dark place.
(Closet, garage, etc.)

2. Once the roses are dry, you are ready to start your basket.
Get some sheets of sheet music.
If you want it to look old, you can copy it onto tan/yellowish paper.
(This is also a good idea if you want to keep the originals neat.)

Optional: Cut the edges of the paper with deckle scissors and use brown chalk or stamping ink to make the edges of the paper darker.

Wrinkle the paper and kind of straighten it out again.

3. Fill the basket with the papers.

4. Trim your roses to desired length and add to the basket.

I linked up to:

Dry Erase Board Tutorial

Today I made this cute mini dry erase board.

It is very quick, simple and fun.
And, you don't need a lot of supplies either.

So, let's start!

I used a simple plastic 5x7 frame from the Dollar Store.
But you can adjust this to work for any size frame you like.

Other supplies needed:

• Dry Erase Marker
  
• Background paper, same size as frame
• Burlap, a little smaller than frame (Or other paper. Make sure it is light enough that you can see the text you write on it with a dry erase marker.)
• Other patterned paper, flowers, ribbon, rhinestones, what ever you can come up with to decorate the frame
• Adhesive (Glue dots)
  

Begin by trimming the background paper.
Just cut it the same size as the paper that was in the frame when you bought it.

Next, cut the burlap a little smaller than the frame.
Then, pull out some pieces of burlap to create a fringed edge all the way around.

Adhere the burlap to the background paper.

Now the fun part begins.
Decorate the background with patterned paper, ribbon, etc.
Just make sure that you keep the 'bulky' parts, like flowers, rhinestones, etc. out.
You will glue these on top of the actual frame, not on the background.

Other things you could use are:
* fabric
*lace
*buttons
*beads
etc.

Put the background paper in the frame, and adhere the bulky items to the frame.
I really like to use mini glue dots, they seem to hold up pretty well!

Enjoy your work!

To make sure you will have your dry erase marker always handy, you could use a marker with a magnet in the lid, like the one pictured. Just glue a magnet on the frame, and you will have a place to keep the marker!

This works great to leave little messages for people
(or yourself, if there is something you don't want to forget)

Also, this is something that kids would enjoy to make, too.
They can just pick their own papers and decorations, and use it to draw on.
(Or leave messages for you.)

I linked this up to:

Button Owl Tutorial

After making 2 versions of the button bird , I decided to try something else. Since I really like owls, that's my next button creation!

You will need the following paper pieces and buttons as shown in the picture above. I used punches to create these shapes, but you could also cut your own.

Arrange the buttons and feet as shown in the picture above. Adhere. I used foam tape for the buttons, that works especially well if the buttons have a center that is lower than the rest of the button. Also, please note that the top button will be covered up completely, so it doesn't really matter what color it is.

Glue the 2 raindrop shapes together to form the head and adhere to the top button.

Add the beak, eyes and belly.

I thought he was missing something, so I gave him wings.

And then I suddenly thought he could use a branch to sit on. So I went to the yard and collected some small twigs... Then I needed to make another pair of feet, since these needed to be glued on top of the branch.

Then, I added a flower to the branch.

I really like the end result. This would be so cute as a card, for a scrapbook page(although I don't think the twig is acid-free...), in a picture frame as wall art, or glued on the frame itself to make a cute picture frame, or ...

What do you think?

I linked this up to: